Add source targets, docs panel, tail-style log viewer, and various improvements

- Add source.sh for remote source backup support
- Add responsive DocsPanel with layout adaptations for narrow screens
- Running tasks log viewer now shows last 100 lines (tail -f style)
- Add incremental backup explanation to README
- Update backup, transfer, schedule, and snaplog modules
- Add MCP config and logo asset

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>

.mcp.json

@@ -0,0 +1,14 @@
+{
+    "$schema": "https://raw.githubusercontent.com/anthropics/claude-code/main/schemas/mcp.schema.json",
+    "mcpServers": {
+        "textual-mcp": {
+            "command": "/home/shuki/projects/textual-mcp/.venv/bin/python",
+            "args": [
+                "-m",
+                "textual_mcp.server"
+            ],
+            "cwd": "/home/shuki/projects/textual-mcp",
+            "description": "Textual TUI framework MCP: CSS validation, widget generation, style analysis, doc search"
+        }
+    }
+}

README.md

@@ -165,6 +165,23 @@ REMOTE_TYPE="local"
 REMOTE_BASE="/mnt/backup-drive"
 ```
 
+## How Incremental Backups Work
+
+GNIZA uses rsync's `--link-dest` option to create space-efficient incremental backups using **hardlinks**.
+
+**The first backup** copies every file from source to destination. This takes the most time and disk space, since every file must be transferred in full. Depending on the size of your data and network speed, this initial backup may take a long time — this is normal.
+
+**Every backup after the first** is significantly faster. Rsync compares each file against the previous snapshot. Files that haven't changed are not transferred again — instead, rsync creates a **hardlink** to the same data block on disk from the previous snapshot. Only new or modified files are actually copied.
+
+This means:
+
+- Each snapshot appears as a full, complete directory tree — you can browse or restore any snapshot independently.
+- Unchanged files share disk space between snapshots through hardlinks, so 10 snapshots of 50 GB with only minor changes might use 55 GB total instead of 500 GB.
+- Deleting an old snapshot only frees space for files that are not referenced by any other snapshot.
+- Subsequent backups typically finish in seconds or minutes rather than hours, since only the differences are transferred.
+
+> **Example**: A first backup of 20 GB takes 45 minutes over SSH. The next day, only 200 MB of files changed — the second backup takes under 2 minutes and uses only 200 MB of additional disk space, while still appearing as a complete 20 GB snapshot.
+
 ## Snapshot Structure
 
 ```

bin/gniza

@@ -25,6 +25,7 @@ source "$GNIZA_DIR/lib/rclone.sh"
 source "$GNIZA_DIR/lib/snapshot.sh"
 source "$GNIZA_DIR/lib/transfer.sh"
 source "$GNIZA_DIR/lib/snaplog.sh"
+source "$GNIZA_DIR/lib/source.sh"
 
 # ── Help ─────────────────────────────────────────────────────
 show_help() {

etc/target.conf.example

@@ -10,6 +10,24 @@ TARGET_RETENTION=""
 TARGET_PRE_HOOK=""
 TARGET_POST_HOOK=""
 TARGET_ENABLED="yes"
+# Remote Source (pull files from a remote before backing up)
+#TARGET_SOURCE_TYPE="local"              # local | ssh | s3 | gdrive
+# SSH source
+#TARGET_SOURCE_HOST=""
+#TARGET_SOURCE_PORT="22"
+#TARGET_SOURCE_USER="root"
+#TARGET_SOURCE_AUTH_METHOD="key"         # key | password
+#TARGET_SOURCE_KEY=""
+#TARGET_SOURCE_PASSWORD=""
+# S3 source
+#TARGET_SOURCE_S3_BUCKET=""
+#TARGET_SOURCE_S3_REGION="us-east-1"
+#TARGET_SOURCE_S3_ENDPOINT=""
+#TARGET_SOURCE_S3_ACCESS_KEY_ID=""
+#TARGET_SOURCE_S3_SECRET_ACCESS_KEY=""
+# Google Drive source
+#TARGET_SOURCE_GDRIVE_SERVICE_ACCOUNT_FILE=""
+#TARGET_SOURCE_GDRIVE_ROOT_FOLDER_ID=""
 # MySQL Backup
 #TARGET_MYSQL_ENABLED="no"
 #TARGET_MYSQL_MODE="all"

lib/backup.sh

@@ -132,22 +132,56 @@ _backup_target_impl() {
     # 9. Transfer each folder
     local folder
     local transfer_failed=false
+    local folder_index=0
+    local staging_dir=""
     while IFS= read -r folder; do
         [[ -z "$folder" ]] && continue
+        if (( folder_index > 0 )) && [[ "$threshold" -gt 0 ]]; then
+            check_remote_disk_space "$threshold" || {
+                log_error "Disk space threshold exceeded — aborting after $folder_index folder(s)"
+                transfer_failed=true
+                break
+            }
+        fi
+        ((folder_index++)) || true
+        if [[ "${TARGET_SOURCE_TYPE:-local}" != "local" ]]; then
+            staging_dir=$(mktemp -d "${WORK_DIR:-/tmp}/gniza-source-XXXXXX")
+            log_info "Pulling from ${TARGET_SOURCE_TYPE} source: $folder"
+            if ! pull_from_source "$folder" "$staging_dir/${folder#/}"; then
+                log_error "Source pull failed for: $folder"
+                rm -rf "$staging_dir"
+                transfer_failed=true
+                continue
+            fi
+            if ! transfer_folder "$target_name" "$staging_dir/${folder#/}" "$ts" "$prev" "${folder#/}"; then
+                log_error "Transfer failed for folder: $folder"
+                transfer_failed=true
+            fi
+            rm -rf "$staging_dir"
+        else
             if ! transfer_folder "$target_name" "$folder" "$ts" "$prev"; then
                 log_error "Transfer failed for folder: $folder"
                 transfer_failed=true
             fi
+        fi
     done < <(get_target_folders)
 
     # 9.5. Transfer MySQL dumps
     if [[ -n "$mysql_dump_dir" && -d "$mysql_dump_dir/_mysql" ]]; then
+        if [[ "$transfer_failed" != "true" ]] && [[ "$threshold" -gt 0 ]]; then
+            check_remote_disk_space "$threshold" || {
+                log_error "Disk space threshold exceeded — aborting before MySQL dump transfer"
+                transfer_failed=true
+            }
+        fi
+        if [[ "$transfer_failed" != "true" ]]; then
             log_info "Transferring MySQL dumps for $target_name..."
             if ! transfer_folder "$target_name" "$mysql_dump_dir/_mysql" "$ts" "$prev" "_mysql"; then
                 log_error "Transfer failed for MySQL dumps"
                 transfer_failed=true
             fi
         fi
+    fi
 
     # Cleanup MySQL temp dir
     mysql_cleanup_dump

lib/schedule.sh

@@ -17,6 +17,26 @@ _GNIZA4LINUX_SCHEDULE_LOADED=1
 readonly GNIZA4LINUX_CRON_TAG="# gniza4linux:"
 SCHEDULES_DIR="$CONFIG_DIR/schedules.d"
 
+# Check whether the cron daemon is running.
+# Returns 0 if running, 1 otherwise. Sets CRON_WARNING with a message.
+_cron_is_running() {
+    CRON_WARNING=""
+    # Try systemctl first (systemd-based systems)
+    if command -v systemctl &>/dev/null; then
+        if systemctl is-active cron &>/dev/null || systemctl is-active crond &>/dev/null; then
+            return 0
+        fi
+        CRON_WARNING="Cron daemon is not running. Start it with: sudo systemctl start cron"
+        return 1
+    fi
+    # Fallback: check for a running cron process
+    if pgrep -x cron &>/dev/null || pgrep -x crond &>/dev/null; then
+        return 0
+    fi
+    CRON_WARNING="Cron daemon does not appear to be running. Scheduled backups will not execute."
+    return 1
+}
+
 # ── Discovery ─────────────────────────────────────────────────
 
 # List schedule names (filenames without .conf) sorted alphabetically.
@@ -248,6 +268,12 @@ install_schedules() {
         local cron_line; cron_line=$(build_cron_line "$sname" 2>/dev/null) || continue
         echo "  [$sname] $cron_line"
     done <<< "$schedules"
+
+    # Warn if cron daemon is not running
+    if ! _cron_is_running; then
+        echo ""
+        log_warn "$CRON_WARNING"
+    fi
 }
 
 # Display current gniza4linux cron entries.

lib/snaplog.sh

@@ -6,10 +6,14 @@ _GNIZA4LINUX_SNAPLOG_LOADED=1
 
 # Tee helper: copies stdin to the transfer log, app log, and stderr (TUI).
 # Used as process substitution target: cmd > >(_snaplog_tee) 2>&1
-# Uses tee(1) to preserve \r from rsync --info=progress2 in real-time.
+# The raw transfer log gets everything; LOG_FILE only gets structured
+# log lines — skips rsync progress percentages and verbose file listings
+# to keep the app log small and readable.
 _snaplog_tee() {
     if [[ -n "${LOG_FILE:-}" ]]; then
-        tee -a "${_TRANSFER_LOG}" "${LOG_FILE}" >&2
+        tee -a "${_TRANSFER_LOG}" >(
+            grep --line-buffered -E '^\[|^(sent |total size |Total |rsync |Number of |===)' >> "${LOG_FILE}"
+        ) >&2
     else
         tee -a "${_TRANSFER_LOG}" >&2
     fi

lib/source.sh

@@ -0,0 +1,173 @@
+#!/usr/bin/env bash
+# gniza4linux/lib/source.sh — Pull files from remote sources
+
+[[ -n "${_GNIZA4LINUX_SOURCE_LOADED:-}" ]] && return 0
+_GNIZA4LINUX_SOURCE_LOADED=1
+
+# Pull files from a remote source to a local staging directory.
+# Usage: pull_from_source <remote_path> <local_dir>
+pull_from_source() {
+    local remote_path="$1"
+    local local_dir="$2"
+
+    mkdir -p "$local_dir" || {
+        log_error "Failed to create staging directory: $local_dir"
+        return 1
+    }
+
+    case "${TARGET_SOURCE_TYPE:-local}" in
+        ssh)
+            _rsync_from_source_ssh "$remote_path" "$local_dir"
+            ;;
+        s3)
+            _build_source_rclone_config "s3"
+            _rclone_from_source "$remote_path" "$local_dir"
+            ;;
+        gdrive)
+            _build_source_rclone_config "gdrive"
+            _rclone_from_source "$remote_path" "$local_dir"
+            ;;
+        *)
+            log_error "Unknown source type: ${TARGET_SOURCE_TYPE}"
+            return 1
+            ;;
+    esac
+}
+
+# Pull from SSH source using rsync.
+_rsync_from_source_ssh() {
+    local remote_path="$1"
+    local local_dir="$2"
+    local attempt=0
+    local max_retries="${SSH_RETRIES:-${DEFAULT_SSH_RETRIES:-3}}"
+
+    # Build SSH command for source connection
+    local ssh_opts=(-o BatchMode=yes -o StrictHostKeyChecking=accept-new)
+    ssh_opts+=(-o ConnectTimeout="${SSH_TIMEOUT:-${DEFAULT_SSH_TIMEOUT:-30}}")
+    ssh_opts+=(-p "${TARGET_SOURCE_PORT:-22}")
+
+    if [[ "${TARGET_SOURCE_AUTH_METHOD:-key}" == "key" && -n "${TARGET_SOURCE_KEY:-}" ]]; then
+        ssh_opts+=(-i "$TARGET_SOURCE_KEY")
+    fi
+
+    local rsync_ssh="ssh ${ssh_opts[*]}"
+    local rsync_opts=(-aHAX --numeric-ids --sparse --rsync-path="rsync --fake-super")
+    rsync_opts+=(--info=progress2 --no-inc-recursive)
+
+    if [[ -n "${_TRANSFER_LOG:-}" ]]; then
+        rsync_opts+=(--verbose --stats)
+    fi
+
+    # Ensure remote_path ends with /
+    [[ "$remote_path" != */ ]] && remote_path="$remote_path/"
+    # Ensure local_dir ends with /
+    [[ "$local_dir" != */ ]] && local_dir="$local_dir/"
+
+    local source_spec="${TARGET_SOURCE_USER:-root}@${TARGET_SOURCE_HOST}:${remote_path}"
+
+    while (( attempt < max_retries )); do
+        ((attempt++)) || true
+        log_debug "rsync (source pull) attempt $attempt/$max_retries: $source_spec -> $local_dir"
+
+        local rsync_cmd=(rsync "${rsync_opts[@]}" -e "$rsync_ssh" "$source_spec" "$local_dir")
+        if [[ "${TARGET_SOURCE_AUTH_METHOD:-key}" == "password" && -n "${TARGET_SOURCE_PASSWORD:-}" ]]; then
+            export SSHPASS="$TARGET_SOURCE_PASSWORD"
+            rsync_cmd=(sshpass -e "${rsync_cmd[@]}")
+        fi
+
+        local rc=0
+        if [[ -n "${_TRANSFER_LOG:-}" ]]; then
+            echo "=== rsync (source pull): $source_spec -> $local_dir ===" >> "$_TRANSFER_LOG"
+            "${rsync_cmd[@]}" > >(_snaplog_tee) 2>&1 || rc=$?
+        else
+            "${rsync_cmd[@]}" || rc=$?
+        fi
+
+        if (( rc == 0 )); then
+            log_debug "rsync (source pull) succeeded on attempt $attempt"
+            return 0
+        fi
+
+        if (( rc == 23 || rc == 24 )); then
+            log_warn "rsync (source pull) completed with warnings (exit $rc): some files could not be transferred"
+            return 0
+        fi
+
+        log_warn "rsync (source pull) failed (exit $rc), attempt $attempt/$max_retries"
+
+        if (( attempt < max_retries )); then
+            local backoff=$(( attempt * 10 ))
+            log_info "Retrying in ${backoff}s..."
+            sleep "$backoff"
+        fi
+    done
+
+    log_error "rsync (source pull) failed after $max_retries attempts"
+    return 1
+}
+
+# Build a temporary rclone config for source pulling.
+# Usage: _build_source_rclone_config <type>
+_build_source_rclone_config() {
+    local src_type="$1"
+    _SOURCE_RCLONE_CONF=$(mktemp /tmp/gniza-source-rclone-XXXXXX.conf)
+
+    if [[ "$src_type" == "s3" ]]; then
+        cat > "$_SOURCE_RCLONE_CONF" <<EOF
+[gniza-source]
+type = s3
+provider = Other
+access_key_id = ${TARGET_SOURCE_S3_ACCESS_KEY_ID:-}
+secret_access_key = ${TARGET_SOURCE_S3_SECRET_ACCESS_KEY:-}
+region = ${TARGET_SOURCE_S3_REGION:-us-east-1}
+endpoint = ${TARGET_SOURCE_S3_ENDPOINT:-}
+EOF
+    elif [[ "$src_type" == "gdrive" ]]; then
+        cat > "$_SOURCE_RCLONE_CONF" <<EOF
+[gniza-source]
+type = drive
+service_account_file = ${TARGET_SOURCE_GDRIVE_SERVICE_ACCOUNT_FILE:-}
+root_folder_id = ${TARGET_SOURCE_GDRIVE_ROOT_FOLDER_ID:-}
+EOF
+    fi
+
+    chmod 600 "$_SOURCE_RCLONE_CONF"
+}
+
+# Pull from S3/GDrive source using rclone.
+_rclone_from_source() {
+    local remote_path="$1"
+    local local_dir="$2"
+
+    if [[ -z "${_SOURCE_RCLONE_CONF:-}" || ! -f "${_SOURCE_RCLONE_CONF:-}" ]]; then
+        log_error "Source rclone config not found"
+        return 1
+    fi
+
+    local rclone_src="gniza-source:${remote_path}"
+    if [[ "${TARGET_SOURCE_TYPE}" == "s3" && -n "${TARGET_SOURCE_S3_BUCKET:-}" ]]; then
+        rclone_src="gniza-source:${TARGET_SOURCE_S3_BUCKET}/${remote_path#/}"
+    fi
+
+    log_debug "rclone (source pull): $rclone_src -> $local_dir"
+
+    local rc=0
+    if [[ -n "${_TRANSFER_LOG:-}" ]]; then
+        echo "=== rclone (source pull): $rclone_src -> $local_dir ===" >> "$_TRANSFER_LOG"
+        rclone copy --config "$_SOURCE_RCLONE_CONF" "$rclone_src" "$local_dir" \
+            --progress 2>&1 | tee -a "$_TRANSFER_LOG" || rc=$?
+    else
+        rclone copy --config "$_SOURCE_RCLONE_CONF" "$rclone_src" "$local_dir" || rc=$?
+    fi
+
+    # Cleanup temp config
+    rm -f "$_SOURCE_RCLONE_CONF"
+    _SOURCE_RCLONE_CONF=""
+
+    if (( rc != 0 )); then
+        log_error "rclone (source pull) failed (exit $rc)"
+        return 1
+    fi
+
+    return 0
+}

lib/targets.sh

@@ -63,6 +63,20 @@ load_target() {
     TARGET_MYSQL_HOST="${TARGET_MYSQL_HOST:-localhost}"
     TARGET_MYSQL_PORT="${TARGET_MYSQL_PORT:-3306}"
     TARGET_MYSQL_EXTRA_OPTS="${TARGET_MYSQL_EXTRA_OPTS:---single-transaction --routines --triggers}"
+    TARGET_SOURCE_TYPE="${TARGET_SOURCE_TYPE:-local}"
+    TARGET_SOURCE_HOST="${TARGET_SOURCE_HOST:-}"
+    TARGET_SOURCE_PORT="${TARGET_SOURCE_PORT:-22}"
+    TARGET_SOURCE_USER="${TARGET_SOURCE_USER:-root}"
+    TARGET_SOURCE_AUTH_METHOD="${TARGET_SOURCE_AUTH_METHOD:-key}"
+    TARGET_SOURCE_KEY="${TARGET_SOURCE_KEY:-}"
+    TARGET_SOURCE_PASSWORD="${TARGET_SOURCE_PASSWORD:-}"
+    TARGET_SOURCE_S3_BUCKET="${TARGET_SOURCE_S3_BUCKET:-}"
+    TARGET_SOURCE_S3_REGION="${TARGET_SOURCE_S3_REGION:-us-east-1}"
+    TARGET_SOURCE_S3_ENDPOINT="${TARGET_SOURCE_S3_ENDPOINT:-}"
+    TARGET_SOURCE_S3_ACCESS_KEY_ID="${TARGET_SOURCE_S3_ACCESS_KEY_ID:-}"
+    TARGET_SOURCE_S3_SECRET_ACCESS_KEY="${TARGET_SOURCE_S3_SECRET_ACCESS_KEY:-}"
+    TARGET_SOURCE_GDRIVE_SERVICE_ACCOUNT_FILE="${TARGET_SOURCE_GDRIVE_SERVICE_ACCOUNT_FILE:-}"
+    TARGET_SOURCE_GDRIVE_ROOT_FOLDER_ID="${TARGET_SOURCE_GDRIVE_ROOT_FOLDER_ID:-}"
 
     log_debug "Loaded target '$name': folders=${TARGET_FOLDERS} enabled=${TARGET_ENABLED}"
 }
@@ -86,12 +100,12 @@ validate_target() {
         log_error "Target '$name': TARGET_FOLDERS is required (or enable MySQL backup)"
         ((errors++)) || true
     elif [[ -n "$TARGET_FOLDERS" ]]; then
-        # Validate each folder exists
+        if [[ "${TARGET_SOURCE_TYPE:-local}" == "local" ]]; then
+            # Validate each folder exists locally
             local -a folders
             IFS=',' read -ra folders <<< "$TARGET_FOLDERS"
             local folder
             for folder in "${folders[@]}"; do
-            # Trim whitespace
                 folder="${folder#"${folder%%[![:space:]]*}"}"
                 folder="${folder%"${folder##*[![:space:]]}"}"
                 [[ -z "$folder" ]] && continue
@@ -103,6 +117,46 @@ validate_target() {
                     ((errors++)) || true
                 fi
             done
+        else
+            # Remote source: validate connection fields
+            case "${TARGET_SOURCE_TYPE}" in
+                ssh)
+                    if [[ -z "${TARGET_SOURCE_HOST}" ]]; then
+                        log_error "Target '$name': TARGET_SOURCE_HOST is required for SSH source"
+                        ((errors++)) || true
+                    fi
+                    ;;
+                s3)
+                    if [[ -z "${TARGET_SOURCE_S3_BUCKET}" ]]; then
+                        log_error "Target '$name': TARGET_SOURCE_S3_BUCKET is required for S3 source"
+                        ((errors++)) || true
+                    fi
+                    if [[ -z "${TARGET_SOURCE_S3_ACCESS_KEY_ID}" || -z "${TARGET_SOURCE_S3_SECRET_ACCESS_KEY}" ]]; then
+                        log_error "Target '$name': S3 credentials are required for S3 source"
+                        ((errors++)) || true
+                    fi
+                    ;;
+                gdrive)
+                    if [[ -z "${TARGET_SOURCE_GDRIVE_SERVICE_ACCOUNT_FILE}" ]]; then
+                        log_error "Target '$name': service account file is required for Google Drive source"
+                        ((errors++)) || true
+                    fi
+                    ;;
+            esac
+            # Validate paths are absolute (even on remote)
+            local -a folders
+            IFS=',' read -ra folders <<< "$TARGET_FOLDERS"
+            local folder
+            for folder in "${folders[@]}"; do
+                folder="${folder#"${folder%%[![:space:]]*}"}"
+                folder="${folder%"${folder##*[![:space:]]}"}"
+                [[ -z "$folder" ]] && continue
+                if [[ "$folder" != /* ]]; then
+                    log_error "Target '$name': folder path must be absolute: $folder"
+                    ((errors++)) || true
+                fi
+            done
+        fi
     fi
 
     if [[ -n "$TARGET_ENABLED" && "$TARGET_ENABLED" != "yes" && "$TARGET_ENABLED" != "no" ]]; then

lib/transfer.sh

@@ -4,6 +4,17 @@
 [[ -n "${_GNIZA4LINUX_TRANSFER_LOADED:-}" ]] && return 0
 _GNIZA4LINUX_TRANSFER_LOADED=1
 
+_check_disk_space_or_abort() {
+    local threshold="${DISK_USAGE_THRESHOLD:-${DEFAULT_DISK_USAGE_THRESHOLD:-95}}"
+    if [[ "$threshold" -gt 0 ]]; then
+        check_remote_disk_space "$threshold" || {
+            log_error "Disk space threshold exceeded during transfer — aborting backup"
+            return 1
+        }
+    fi
+    return 0
+}
+
 rsync_to_remote() {
     local source_dir="$1"
     local remote_dest="$2"
@@ -78,6 +89,7 @@ rsync_to_remote() {
         fi
 
         log_warn "rsync failed (exit $rc), attempt $attempt/$max_retries"
+        _check_disk_space_or_abort || return 1
 
         if (( attempt < max_retries )); then
             local backoff=$(( attempt * 10 ))
@@ -154,6 +166,7 @@ rsync_local() {
         fi
 
         log_warn "rsync (local) failed (exit $rc), attempt $attempt/$max_retries"
+        _check_disk_space_or_abort || return 1
 
         if (( attempt < max_retries )); then
             local backoff=$(( attempt * 10 ))

logo.txt

@@ -0,0 +1,17 @@
+  ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
+  ▓▓▓▓▓▓▓▓▓▓▓▓          ▓▓▓▓▓▓▓▓▓▓▓
+  ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
+  ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
+
+  ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
+  ▓▓▓▓▓▓▓▓▓▓▓▓          ▓▓▓▓▓▓▓▓▓▓▓
+  ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
+  ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
+
+  ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
+  ▓▓▓▓▓▓▓▓▓▓▓▓          ▓▓▓▓▓▓▓▓▓▓▓
+  ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
+  ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
+              ▓▓▓▓▓▓▓▓▓▓
+                ▓▓▓▓▓▓
+                  ▓▓

tui/app.py

@@ -63,18 +63,29 @@ class GnizaApp(App):
         else:
             self.notify(f"{job.label} failed (exit code {message.return_code})", severity="error")
 
-    # Width thresholds for docs panel
+    # Below this width: hide inline panel, F1 opens modal instead
-    DOCS_VERTICAL_WIDTH = 80   # Below: panel moves to bottom
+    DOCS_MODAL_WIDTH = 80
-    DOCS_HIDE_WIDTH = 45       # Below: panel hidden entirely
 
     def action_toggle_docs(self) -> None:
+        if self.size.width < self.DOCS_MODAL_WIDTH:
+            self._open_help_modal()
+        else:
             try:
                 panel = self.screen.query_one("#docs-panel")
                 panel.display = not panel.display
-            panel._user_toggled = True
             except NoMatches:
                 pass
 
+    def _open_help_modal(self) -> None:
+        from tui.widgets import HelpModal
+        from tui.docs import SCREEN_DOCS
+        try:
+            panel = self.screen.query_one("#docs-panel")
+            content = panel._content
+        except NoMatches:
+            content = "No documentation available for this screen."
+        self.push_screen(HelpModal(content))
+
     def on_resize(self, event: Resize) -> None:
         self._update_docs_layout(event.size.width)
 
@@ -85,23 +96,12 @@ class GnizaApp(App):
     def _update_docs_layout(self, width: int) -> None:
         try:
             panel = self.screen.query_one("#docs-panel")
-            container = self.screen.query_one(".screen-with-docs")
         except NoMatches:
             return
-        # Auto-hide only on very narrow screens (unless user toggled)
+        if width < self.DOCS_MODAL_WIDTH:
-        if not getattr(panel, "_user_toggled", False):
+            panel.display = False
-            panel.display = width >= self.DOCS_HIDE_WIDTH
-        # Switch layout direction
-        if width < self.DOCS_VERTICAL_WIDTH:
-            container.styles.layout = "vertical"
-            panel.styles.width = "100%"
-            panel.styles.min_width = None
-            panel.styles.max_height = "40%"
         else:
-            container.styles.layout = "horizontal"
+            panel.display = True
-            panel.styles.width = "30%"
-            panel.styles.min_width = 30
-            panel.styles.max_height = None
 
     async def action_quit(self) -> None:
         if job_manager.running_count() > 0:

tui/docs.py

@@ -65,6 +65,14 @@ SCREEN_DOCS = {
         "  [bold]Retention override[/bold] - Custom snapshot count.\n"
         "  [bold]Pre/Post hooks[/bold] - Shell commands to run before/after the backup.\n"
         "\n"
+        "[bold]Source section:[/bold]\n"
+        "  Set Source Type to pull files from a remote server instead of backing up local folders.\n"
+        "  [bold]Local[/bold] - Default. Back up folders on this machine.\n"
+        "  [bold]SSH[/bold] - Pull files from a remote server via SSH/rsync before backing up.\n"
+        "  [bold]S3[/bold] - Pull files from an S3-compatible bucket.\n"
+        "  [bold]Google Drive[/bold] - Pull files from Google Drive via service account.\n"
+        "  When using a remote source, specify remote paths in the Folders field instead of local paths.\n"
+        "\n"
         "[bold]MySQL section:[/bold]\n"
         "  Enable MySQL to dump databases alongside files. Choose 'All databases' or select specific ones. Leave user/password empty for socket auth."
     ),
@@ -204,7 +212,6 @@ SCREEN_DOCS = {
         "\n"
         "[bold]Buttons:[/bold]\n"
         "  [bold]View[/bold] - Display the selected log file contents in the viewer below.\n"
-        "  [bold]Status[/bold] - Show a summary of recent backup activity.\n"
         "\n"
         "[bold]Status detection:[/bold]\n"
         "  - [green]Success[/green] - 'Backup completed' found, no errors.\n"

tui/gniza.tcss

@@ -73,6 +73,19 @@ Select {
     margin: 0 0 1 0;
 }
 
+#settings-screen Input,
+#settings-screen Select {
+    margin: 0;
+}
+
+#settings-screen Static {
+    margin: 1 0 0 0;
+}
+
+#settings-screen #screen-title {
+    margin: 0;
+}
+
 SelectionList {
     height: auto;
     max-height: 8;
@@ -120,6 +133,7 @@ SelectionList {
 #targets-buttons,
 #remotes-buttons,
 #rt-buttons,
+#log-pager-buttons,
 #logs-buttons,
 #snapshots-buttons,
 #sched-buttons,
@@ -138,6 +152,7 @@ SelectionList {
 #targets-buttons Button,
 #remotes-buttons Button,
 #rt-buttons Button,
+#log-pager-buttons Button,
 #logs-buttons Button,
 #snapshots-buttons Button,
 #sched-buttons Button,
@@ -148,6 +163,12 @@ SelectionList {
     margin: 0 1 0 0;
 }
 
+#log-page-info {
+    width: auto;
+    padding: 0 1;
+    content-align: center middle;
+}
+
 /* Dialogs */
 #confirm-dialog {
     width: 80%;
@@ -177,6 +198,25 @@ SelectionList {
     margin: 0 1 0 0;
 }
 
+/* Help modal */
+HelpModal {
+    align: center middle;
+}
+
+#help-modal {
+    width: 90%;
+    max-width: 70;
+    height: 80%;
+    padding: 1 2;
+    background: $panel;
+    border: thick $accent;
+}
+
+#help-modal #help-close {
+    margin: 1 0 0 0;
+    width: auto;
+}
+
 /* Folder picker */
 #folder-picker {
     width: 90%;

tui/jobs.py

@@ -323,12 +323,13 @@ class JobManager:
             text = Path(log_file).read_text()
             if not text.strip():
                 return None
-            for marker in ("FATAL:", "ERROR:", "failed", "Failed"):
+            # Check success markers first — these are definitive
-                if marker in text:
+            if "Backup completed" in text or "Backup Summary" in text:
-                    return 1
-            # Look for success indicators
-            if "completed" in text.lower() or "Backup Summary" in text:
                 return 0
+            # Only match structured log lines for errors, not rsync file listings
+            for line in text.splitlines():
+                if "[FATAL]" in line or "[ERROR]" in line:
+                    return 1
         except OSError:
             return None
         return None

tui/models.py

@@ -12,6 +12,20 @@ class Target:
     pre_hook: str = ""
     post_hook: str = ""
     enabled: str = "yes"
+    source_type: str = "local"
+    source_host: str = ""
+    source_port: str = "22"
+    source_user: str = "root"
+    source_auth_method: str = "key"
+    source_key: str = ""
+    source_password: str = ""
+    source_s3_bucket: str = ""
+    source_s3_region: str = "us-east-1"
+    source_s3_endpoint: str = ""
+    source_s3_access_key_id: str = ""
+    source_s3_secret_access_key: str = ""
+    source_gdrive_sa_file: str = ""
+    source_gdrive_root_folder_id: str = ""
     mysql_enabled: str = "no"
     mysql_mode: str = "all"
     mysql_databases: str = ""
@@ -23,7 +37,7 @@ class Target:
     mysql_extra_opts: str = "--single-transaction --routines --triggers"
 
     def to_conf(self) -> dict[str, str]:
-        return {
+        data = {
             "TARGET_NAME": self.name,
             "TARGET_FOLDERS": self.folders,
             "TARGET_EXCLUDE": self.exclude,
@@ -33,6 +47,31 @@ class Target:
             "TARGET_PRE_HOOK": self.pre_hook,
             "TARGET_POST_HOOK": self.post_hook,
             "TARGET_ENABLED": self.enabled,
+            "TARGET_SOURCE_TYPE": self.source_type,
+        }
+        if self.source_type == "ssh":
+            data.update({
+                "TARGET_SOURCE_HOST": self.source_host,
+                "TARGET_SOURCE_PORT": self.source_port,
+                "TARGET_SOURCE_USER": self.source_user,
+                "TARGET_SOURCE_AUTH_METHOD": self.source_auth_method,
+                "TARGET_SOURCE_KEY": self.source_key,
+                "TARGET_SOURCE_PASSWORD": self.source_password,
+            })
+        elif self.source_type == "s3":
+            data.update({
+                "TARGET_SOURCE_S3_BUCKET": self.source_s3_bucket,
+                "TARGET_SOURCE_S3_REGION": self.source_s3_region,
+                "TARGET_SOURCE_S3_ENDPOINT": self.source_s3_endpoint,
+                "TARGET_SOURCE_S3_ACCESS_KEY_ID": self.source_s3_access_key_id,
+                "TARGET_SOURCE_S3_SECRET_ACCESS_KEY": self.source_s3_secret_access_key,
+            })
+        elif self.source_type == "gdrive":
+            data.update({
+                "TARGET_SOURCE_GDRIVE_SERVICE_ACCOUNT_FILE": self.source_gdrive_sa_file,
+                "TARGET_SOURCE_GDRIVE_ROOT_FOLDER_ID": self.source_gdrive_root_folder_id,
+            })
+        data.update({
             "TARGET_MYSQL_ENABLED": self.mysql_enabled,
             "TARGET_MYSQL_MODE": self.mysql_mode,
             "TARGET_MYSQL_DATABASES": self.mysql_databases,
@@ -42,7 +81,8 @@ class Target:
             "TARGET_MYSQL_HOST": self.mysql_host,
             "TARGET_MYSQL_PORT": self.mysql_port,
             "TARGET_MYSQL_EXTRA_OPTS": self.mysql_extra_opts,
-        }
+        })
+        return data
 
     @classmethod
     def from_conf(cls, name: str, data: dict[str, str]) -> "Target":
@@ -56,6 +96,20 @@ class Target:
             pre_hook=data.get("TARGET_PRE_HOOK", ""),
             post_hook=data.get("TARGET_POST_HOOK", ""),
             enabled=data.get("TARGET_ENABLED", "yes"),
+            source_type=data.get("TARGET_SOURCE_TYPE", "local"),
+            source_host=data.get("TARGET_SOURCE_HOST", ""),
+            source_port=data.get("TARGET_SOURCE_PORT", "22"),
+            source_user=data.get("TARGET_SOURCE_USER", "root"),
+            source_auth_method=data.get("TARGET_SOURCE_AUTH_METHOD", "key"),
+            source_key=data.get("TARGET_SOURCE_KEY", ""),
+            source_password=data.get("TARGET_SOURCE_PASSWORD", ""),
+            source_s3_bucket=data.get("TARGET_SOURCE_S3_BUCKET", ""),
+            source_s3_region=data.get("TARGET_SOURCE_S3_REGION", "us-east-1"),
+            source_s3_endpoint=data.get("TARGET_SOURCE_S3_ENDPOINT", ""),
+            source_s3_access_key_id=data.get("TARGET_SOURCE_S3_ACCESS_KEY_ID", ""),
+            source_s3_secret_access_key=data.get("TARGET_SOURCE_S3_SECRET_ACCESS_KEY", ""),
+            source_gdrive_sa_file=data.get("TARGET_SOURCE_GDRIVE_SERVICE_ACCOUNT_FILE", ""),
+            source_gdrive_root_folder_id=data.get("TARGET_SOURCE_GDRIVE_ROOT_FOLDER_ID", ""),
             mysql_enabled=data.get("TARGET_MYSQL_ENABLED", "no"),
             mysql_mode=data.get("TARGET_MYSQL_MODE", "all"),
             mysql_databases=data.get("TARGET_MYSQL_DATABASES", ""),

tui/screens/logs.py

@@ -1,5 +1,4 @@
 import re
-from datetime import datetime
 from pathlib import Path
 
 from textual.app import ComposeResult
@@ -23,16 +22,26 @@ def _format_log_name(name: str) -> tuple[str, str]:
 
 
 def _detect_log_status(filepath: Path) -> str:
-    """Determine backup status from log file content."""
+    """Determine backup status from log file content.
+
+    Only reads last 100 KB for efficiency on large files.
+    """
     try:
-        text = filepath.read_text()
+        size = filepath.stat().st_size
+        if size == 0:
+            return "Empty"
+        with open(filepath, "r") as f:
+            if size > 102400:
+                f.seek(size - 102400)
+                f.readline()
+            tail = f.read()
     except OSError:
         return "?"
-    if not text.strip():
+    if not tail.strip():
         return "Empty"
-    has_error = "[ERROR]" in text or "[FATAL]" in text
+    has_error = "[ERROR]" in tail or "[FATAL]" in tail
-    has_completed = "Backup completed" in text or "Restore completed" in text
+    has_completed = "Backup completed" in tail or "Restore completed" in tail
-    has_lock_released = "Lock released" in text
+    has_lock_released = "Lock released" in tail
     if has_completed and not has_error:
         return "Success"
     if has_error:
@@ -42,9 +51,29 @@ def _detect_log_status(filepath: Path) -> str:
     return "Interrupted"
 
 
+def _build_line_index(filepath: Path) -> list[int]:
+    """Build an index of byte offsets for each line start. Fast even for large files."""
+    offsets = [0]
+    with open(filepath, "rb") as f:
+        while True:
+            chunk = f.read(1024 * 1024)
+            if not chunk:
+                break
+            base = offsets[-1] if not offsets else f.tell() - len(chunk)
+            start = 0
+            while True:
+                pos = chunk.find(b"\n", start)
+                if pos == -1:
+                    break
+                offsets.append(base + pos + 1)
+                start = pos + 1
+    return offsets
+
+
 class LogsScreen(Screen):
 
     BINDINGS = [("escape", "go_back", "Back")]
+    LINES_PER_PAGE = 200
 
     def compose(self) -> ComposeResult:
         yield Header(show_clock=True)
@@ -54,15 +83,30 @@ class LogsScreen(Screen):
                 yield DataTable(id="logs-table")
                 with Horizontal(id="logs-buttons"):
                     yield Button("View", variant="primary", id="btn-view")
-                    yield Button("Status", id="btn-status")
                     yield Button("Back", id="btn-back")
+                with Horizontal(id="log-pager-buttons"):
+                    yield Button("◀ Prev", id="btn-prev-page")
+                    yield Static("", id="log-page-info")
+                    yield Button("Next ▶", id="btn-next-page")
                 yield RichLog(id="log-viewer", wrap=True, highlight=True)
             yield DocsPanel.for_screen("logs-screen")
         yield Footer()
 
     def on_mount(self) -> None:
+        self._log_filepath: Path | None = None
+        self._line_offsets: list[int] = []
+        self._total_lines: int = 0
+        self._current_page: int = 0
+        self._total_pages: int = 0
+        self._hide_pager()
         self._refresh_table()
 
+    def _hide_pager(self) -> None:
+        self.query_one("#log-pager-buttons").display = False
+
+    def _show_pager(self) -> None:
+        self.query_one("#log-pager-buttons").display = self._total_pages > 1
+
     def _refresh_table(self) -> None:
         table = self.query_one("#logs-table", DataTable)
         table.clear(columns=True)
@@ -95,56 +139,59 @@ class LogsScreen(Screen):
         elif event.button.id == "btn-view":
             name = self._selected_log()
             if name:
-                self._view_log(name)
+                self._open_log(name)
             else:
                 self.notify("Select a log file first", severity="warning")
-        elif event.button.id == "btn-status":
+        elif event.button.id == "btn-prev-page":
-            self._show_status()
+            if self._current_page > 0:
+                self._current_page -= 1
+                self._render_page()
+        elif event.button.id == "btn-next-page":
+            if self._current_page < self._total_pages - 1:
+                self._current_page += 1
+                self._render_page()
 
-    def _view_log(self, name: str) -> None:
+    def _open_log(self, name: str) -> None:
         filepath = (Path(LOG_DIR) / name).resolve()
         if not filepath.is_relative_to(Path(LOG_DIR).resolve()):
             self.notify("Invalid log path", severity="error")
             return
+        if not filepath.is_file():
             viewer = self.query_one("#log-viewer", RichLog)
             viewer.clear()
-        if filepath.is_file():
-            content = filepath.read_text()
-            viewer.write(content)
-        else:
             viewer.write(f"File not found: {filepath}")
+            self._hide_pager()
+            return
+        self._log_filepath = filepath
+        self._line_offsets = _build_line_index(filepath)
+        self._total_lines = max(len(self._line_offsets) - 1, 1)
+        self._total_pages = max(1, (self._total_lines + self.LINES_PER_PAGE - 1) // self.LINES_PER_PAGE)
+        # Start at last page (most recent output)
+        self._current_page = self._total_pages - 1
+        self._show_pager()
+        self._render_page()
 
-    def _show_status(self) -> None:
+    def _render_page(self) -> None:
         viewer = self.query_one("#log-viewer", RichLog)
         viewer.clear()
-        log_dir = Path(LOG_DIR)
+        if not self._log_filepath:
-        viewer.write("Backup Status Overview")
-        viewer.write("=" * 40)
-        if not log_dir.is_dir():
-            viewer.write("Log directory does not exist.")
             return
-        logs = sorted(log_dir.glob("gniza-*.log"), key=lambda p: p.stat().st_mtime, reverse=True)
+        start_line = self._current_page * self.LINES_PER_PAGE
-        if logs:
+        end_line = min(start_line + self.LINES_PER_PAGE, self._total_lines)
-            latest = logs[0]
+        # Seek to the right byte offset and read the lines
-            from datetime import datetime
+        start_byte = self._line_offsets[start_line]
-            mtime = datetime.fromtimestamp(latest.stat().st_mtime)
+        end_byte = self._line_offsets[end_line] if end_line < len(self._line_offsets) else self._log_filepath.stat().st_size
-            viewer.write(f"Last log: {mtime.strftime('%Y-%m-%d %H:%M:%S')}")
+        with open(self._log_filepath, "r", errors="replace") as f:
-            last_line = ""
+            f.seek(start_byte)
-            with open(latest) as f:
+            chunk = f.read(end_byte - start_byte)
-                for line in f:
+        for line in chunk.splitlines():
-                    last_line = line.rstrip()
+            viewer.write(line)
-            if last_line:
+        # Update page info
-                viewer.write(f"Last entry: {last_line}")
+        page_info = self.query_one("#log-page-info", Static)
-        else:
+        page_info.update(f" Page {self._current_page + 1}/{self._total_pages} ")
-            viewer.write("No backup logs found.")
+        # Update button states
-        viewer.write(f"Log files: {len(logs)}")
+        self.query_one("#btn-prev-page", Button).disabled = self._current_page == 0
-        total = sum(f.stat().st_size for f in logs)
+        self.query_one("#btn-next-page", Button).disabled = self._current_page >= self._total_pages - 1
-        if total >= 1048576:
-            viewer.write(f"Total size: {total / 1048576:.1f} MB")
-        elif total >= 1024:
-            viewer.write(f"Total size: {total / 1024:.1f} KB")
-        else:
-            viewer.write(f"Total size: {total} B")
 
     def action_go_back(self) -> None:
         self.app.pop_screen()

tui/screens/main_menu.py

@@ -4,6 +4,8 @@ from textual.widgets import Header, Footer, Static, OptionList
 from textual.widgets.option_list import Option
 from textual.containers import Horizontal, Vertical
 
+from tui.jobs import job_manager
+
 LOGO = """\
 [green]▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
 ▓▓▓▓▓▓▓▓▓▓▓▓          ▓▓▓▓▓▓▓▓▓▓▓
@@ -39,6 +41,8 @@ MENU_ITEMS = [
     ("quit", "Quit"),
 ]
 
+SPINNER_FRAMES = ["⠋", "⠙", "⠹", "⠸", "⠼", "⠴", "⠦", "⠧", "⠇", "⠏"]
+
 
 class MainMenuScreen(Screen):
 
@@ -59,6 +63,9 @@ class MainMenuScreen(Screen):
     def on_mount(self) -> None:
         self._update_layout()
         self.query_one("#menu-list", OptionList).focus()
+        self._spinner_idx = 0
+        self._update_running_label()
+        self._spinner_timer = self.set_interval(1, self._tick_spinner)
 
     def on_resize(self) -> None:
         self._update_layout()
@@ -77,6 +84,25 @@ class MainMenuScreen(Screen):
             layout.styles.align = ("center", "middle")
             layout.styles.overflow_y = "hidden"
 
+    def _tick_spinner(self) -> None:
+        self._spinner_idx = (self._spinner_idx + 1) % len(SPINNER_FRAMES)
+        self._update_running_label()
+
+    def _update_running_label(self) -> None:
+        count = job_manager.running_count()
+        menu = self.query_one("#menu-list", OptionList)
+        # Find the running_tasks option index
+        for idx in range(menu.option_count):
+            opt = menu.get_option_at_index(idx)
+            if opt.id == "running_tasks":
+                if count > 0:
+                    spinner = SPINNER_FRAMES[self._spinner_idx]
+                    label = f"{spinner} Running Tasks ({count})"
+                else:
+                    label = "Running Tasks"
+                menu.replace_option_prompt(opt.id, label)
+                break
+
     def on_option_list_option_selected(self, event: OptionList.OptionSelected) -> None:
         option_id = event.option.id
         if option_id == "quit":

tui/screens/running_tasks.py

@@ -12,6 +12,7 @@ from tui.jobs import job_manager
 from tui.widgets import ConfirmDialog, DocsPanel
 
 _PROGRESS_RE = re.compile(r"(\d+)%")
+_SPINNER = ["⠋", "⠙", "⠹", "⠸", "⠼", "⠴", "⠦", "⠧", "⠇", "⠏"]
 
 
 class RunningTasksScreen(Screen):
@@ -39,8 +40,9 @@ class RunningTasksScreen(Screen):
         table = self.query_one("#rt-table", DataTable)
         table.add_columns("Status", "Job", "Started", "Duration")
         table.cursor_type = "row"
+        self._spinner_idx = 0
         self._refresh_table()
-        self._timer = self.set_interval(1, self._refresh_table)
+        self._timer = self.set_interval(1, self._tick)
         self._log_timer: Timer | None = None
         self._viewing_job_id: str | None = None
         self._log_file_pos: int = 0
@@ -60,14 +62,19 @@ class RunningTasksScreen(Screen):
         hours, m = divmod(mins, 60)
         return f"{hours}h {m}m"
 
+    def _tick(self) -> None:
+        self._spinner_idx = (self._spinner_idx + 1) % len(_SPINNER)
+        self._refresh_table()
+
     def _refresh_table(self) -> None:
         job_manager.check_reconnected()
         table = self.query_one("#rt-table", DataTable)
         old_row = table.cursor_coordinate.row if table.row_count > 0 else 0
         table.clear()
+        spinner = _SPINNER[self._spinner_idx]
         for job in job_manager.list_jobs():
             if job.status == "running":
-                icon = "... "
+                icon = f" {spinner} "
             elif job.status == "success":
                 icon = " ok "
             elif job.status == "unknown":
@@ -109,17 +116,25 @@ class RunningTasksScreen(Screen):
         progress = self.query_one("#rt-progress", ProgressBar)
         label = self.query_one("#rt-progress-label", Static)
         progress.update(progress=0)
-        # Load existing content from log file
+        # Load only the tail of the log file (like tail -f)
         if job._log_file and Path(job._log_file).is_file():
             try:
                 raw = Path(job._log_file).read_bytes()
                 self._log_file_pos = len(raw)
                 content = raw.decode(errors="replace")
+                # Show only last 100 lines
+                lines = content.splitlines()
+                if len(lines) > 100:
+                    log_viewer.write(f"--- showing last 100 of {len(lines)} lines ---")
+                    content = "\n".join(lines[-100:])
                 self._process_log_content(content, log_viewer)
             except OSError:
                 pass
         elif job.output:
-            for line in job.output:
+            tail = job.output[-100:] if len(job.output) > 100 else job.output
+            if len(job.output) > 100:
+                log_viewer.write(f"--- showing last 100 of {len(job.output)} lines ---")
+            for line in tail:
                 log_viewer.write(line)
         # Show/hide progress bar based on job status
         is_running = job.status == "running"

tui/screens/target_edit.py

@@ -34,6 +34,44 @@ class TargetEditScreen(Screen):
                 if self._is_new:
                     yield Static("Name:")
                     yield Input(value="", placeholder="Target name", id="te-name")
+                yield Static("--- Source ---", classes="section-label")
+                yield Static("Source Type:")
+                yield Select(
+                    [("Local", "local"), ("SSH", "ssh"), ("S3", "s3"), ("Google Drive", "gdrive")],
+                    value=target.source_type,
+                    id="te-source-type",
+                )
+                yield Static("Source Host:", classes="source-field source-ssh-field")
+                yield Input(value=target.source_host, placeholder="hostname or IP", id="te-source-host", classes="source-field source-ssh-field")
+                yield Static("Source Port:", classes="source-field source-ssh-field")
+                yield Input(value=target.source_port, placeholder="22", id="te-source-port", classes="source-field source-ssh-field")
+                yield Static("Source User:", classes="source-field source-ssh-field")
+                yield Input(value=target.source_user, placeholder="root", id="te-source-user", classes="source-field source-ssh-field")
+                yield Static("Auth Method:", classes="source-field source-ssh-field")
+                yield Select(
+                    [("SSH Key", "key"), ("Password", "password")],
+                    value=target.source_auth_method,
+                    id="te-source-auth-method",
+                    classes="source-field source-ssh-field",
+                )
+                yield Static("SSH Key Path:", classes="source-field source-ssh-field source-key-field")
+                yield Input(value=target.source_key, placeholder="/root/.ssh/id_rsa", id="te-source-key", classes="source-field source-ssh-field source-key-field")
+                yield Static("Password:", classes="source-field source-ssh-field source-password-field")
+                yield Input(value=target.source_password, placeholder="SSH password", password=True, id="te-source-password", classes="source-field source-ssh-field source-password-field")
+                yield Static("S3 Bucket:", classes="source-field source-s3-field")
+                yield Input(value=target.source_s3_bucket, placeholder="my-bucket", id="te-source-s3-bucket", classes="source-field source-s3-field")
+                yield Static("S3 Region:", classes="source-field source-s3-field")
+                yield Input(value=target.source_s3_region, placeholder="us-east-1", id="te-source-s3-region", classes="source-field source-s3-field")
+                yield Static("S3 Endpoint:", classes="source-field source-s3-field")
+                yield Input(value=target.source_s3_endpoint, placeholder="https://s3.amazonaws.com", id="te-source-s3-endpoint", classes="source-field source-s3-field")
+                yield Static("S3 Access Key:", classes="source-field source-s3-field")
+                yield Input(value=target.source_s3_access_key_id, placeholder="AKIA...", id="te-source-s3-access-key", classes="source-field source-s3-field")
+                yield Static("S3 Secret Key:", classes="source-field source-s3-field")
+                yield Input(value=target.source_s3_secret_access_key, placeholder="secret", password=True, id="te-source-s3-secret-key", classes="source-field source-s3-field")
+                yield Static("Service Account File:", classes="source-field source-gdrive-field")
+                yield Input(value=target.source_gdrive_sa_file, placeholder="/path/to/sa.json", id="te-source-gdrive-sa-file", classes="source-field source-gdrive-field")
+                yield Static("Root Folder ID:", classes="source-field source-gdrive-field")
+                yield Input(value=target.source_gdrive_root_folder_id, placeholder="folder ID", id="te-source-gdrive-root-folder-id", classes="source-field source-gdrive-field")
                 yield Static("Folders (comma-separated):")
                 yield Input(value=target.folders, placeholder="/path1,/path2", id="te-folders")
                 yield Button("Browse...", id="btn-browse")
@@ -91,10 +129,13 @@ class TargetEditScreen(Screen):
 
     def on_mount(self) -> None:
         self._update_mysql_visibility()
+        self._update_source_visibility()
 
     def on_select_changed(self, event: Select.Changed) -> None:
         if event.select.id in ("te-mysql-enabled", "te-mysql-mode"):
             self._update_mysql_visibility()
+        elif event.select.id in ("te-source-type", "te-source-auth-method"):
+            self._update_source_visibility()
 
     def _update_mysql_visibility(self) -> None:
         enabled = str(self.query_one("#te-mysql-enabled", Select).value)
@@ -108,6 +149,31 @@ class TargetEditScreen(Screen):
             for w in self.query(".mysql-all-field"):
                 w.display = mode == "all"
 
+    def _update_source_visibility(self) -> None:
+        source_type = str(self.query_one("#te-source-type", Select).value)
+        is_remote = source_type != "local"
+        # Hide all source fields first
+        for w in self.query(".source-field"):
+            w.display = False
+        # Show fields for selected source type
+        if source_type == "ssh":
+            for w in self.query(".source-ssh-field"):
+                w.display = True
+            # Toggle key/password based on auth method
+            auth = str(self.query_one("#te-source-auth-method", Select).value)
+            for w in self.query(".source-key-field"):
+                w.display = auth == "key"
+            for w in self.query(".source-password-field"):
+                w.display = auth == "password"
+        elif source_type == "s3":
+            for w in self.query(".source-s3-field"):
+                w.display = True
+        elif source_type == "gdrive":
+            for w in self.query(".source-gdrive-field"):
+                w.display = True
+        # Hide browse button when remote
+        self.query_one("#btn-browse", Button).display = not is_remote
+
     def on_button_pressed(self, event: Button.Pressed) -> None:
         if event.button.id == "btn-cancel":
             self.dismiss(None)
@@ -148,9 +214,13 @@ class TargetEditScreen(Screen):
 
         folders = self.query_one("#te-folders", Input).value.strip()
         mysql_enabled = str(self.query_one("#te-mysql-enabled", Select).value)
-        if not folders and mysql_enabled != "yes":
+        source_type = str(self.query_one("#te-source-type", Select).value)
+        if not folders and mysql_enabled != "yes" and source_type == "local":
             self.notify("At least one folder or MySQL backup is required", severity="error")
             return
+        if source_type != "local" and not folders:
+            self.notify("At least one remote path is required", severity="error")
+            return
 
         target = Target(
             name=name,
@@ -162,6 +232,20 @@ class TargetEditScreen(Screen):
             pre_hook=self.query_one("#te-prehook", Input).value.strip(),
             post_hook=self.query_one("#te-posthook", Input).value.strip(),
             enabled=str(self.query_one("#te-enabled", Select).value),
+            source_type=source_type,
+            source_host=self.query_one("#te-source-host", Input).value.strip(),
+            source_port=self.query_one("#te-source-port", Input).value.strip(),
+            source_user=self.query_one("#te-source-user", Input).value.strip(),
+            source_auth_method=str(self.query_one("#te-source-auth-method", Select).value),
+            source_key=self.query_one("#te-source-key", Input).value.strip(),
+            source_password=self.query_one("#te-source-password", Input).value.strip(),
+            source_s3_bucket=self.query_one("#te-source-s3-bucket", Input).value.strip(),
+            source_s3_region=self.query_one("#te-source-s3-region", Input).value.strip(),
+            source_s3_endpoint=self.query_one("#te-source-s3-endpoint", Input).value.strip(),
+            source_s3_access_key_id=self.query_one("#te-source-s3-access-key", Input).value.strip(),
+            source_s3_secret_access_key=self.query_one("#te-source-s3-secret-key", Input).value.strip(),
+            source_gdrive_sa_file=self.query_one("#te-source-gdrive-sa-file", Input).value.strip(),
+            source_gdrive_root_folder_id=self.query_one("#te-source-gdrive-root-folder-id", Input).value.strip(),
             mysql_enabled=mysql_enabled,
             mysql_mode=str(self.query_one("#te-mysql-mode", Select).value),
             mysql_databases=self.query_one("#te-mysql-databases", Input).value.strip(),

tui/web_templates/app_index.html

@@ -134,6 +134,7 @@
       #terminal .xterm-screen {
         width: 100% !important;
       }
+
     </style>
     <script>
       function getStartUrl() {

tui/widgets/__init__.py

@@ -3,4 +3,4 @@ from tui.widgets.file_picker import FilePicker
 from tui.widgets.confirm_dialog import ConfirmDialog
 from tui.widgets.operation_log import OperationLog
 from tui.widgets.snapshot_browser import SnapshotBrowser
-from tui.widgets.docs_panel import DocsPanel
+from tui.widgets.docs_panel import DocsPanel, HelpModal

tui/widgets/docs_panel.py

@@ -1,11 +1,35 @@
 from textual.containers import VerticalScroll
-from textual.widgets import Static
+from textual.screen import ModalScreen
+from textual.widgets import Static, Button
+from textual.containers import Vertical
 from tui.docs import SCREEN_DOCS
 
 
+class HelpModal(ModalScreen[None]):
+
+    BINDINGS = [("escape", "close", "Close"), ("f1", "close", "Close")]
+
+    def __init__(self, content: str):
+        super().__init__()
+        self._content = content
+
+    def compose(self):
+        with VerticalScroll(id="help-modal"):
+            yield Static("[bold underline]Help[/]", id="docs-title")
+            yield Static(self._content, id="docs-body")
+            yield Button("Close", id="help-close")
+
+    def on_button_pressed(self, event: Button.Pressed) -> None:
+        self.dismiss(None)
+
+    def action_close(self) -> None:
+        self.dismiss(None)
+
+
 class DocsPanel(VerticalScroll):
     DEFAULT_CSS = """
     DocsPanel {
+        display: none;
         width: 30%;
         min-width: 30;
         border-left: solid $accent;
@@ -23,27 +47,16 @@ class DocsPanel(VerticalScroll):
         yield Static(self._content, id="docs-body")
 
     def on_mount(self) -> None:
-        self.app.call_later(self._apply_layout)
+        # Delay check — at mount time the terminal may not have reported
+        # its real size yet (especially in web/mobile via textual-serve).
+        self.set_timer(0.3, self._check_show)
+        self.set_timer(0.8, self._check_show)
 
     def on_resize(self) -> None:
-        self._apply_layout()
+        self._check_show()
 
-    def _apply_layout(self) -> None:
+    def _check_show(self) -> None:
-        width = self.app.size.width
+        self.display = self.app.size.width >= 80
-        try:
-            container = self.screen.query_one(".screen-with-docs")
-        except Exception:
-            return
-        if width < 80:
-            container.styles.layout = "vertical"
-            self.styles.width = "100%"
-            self.styles.min_width = None
-            self.styles.max_height = "40%"
-        else:
-            container.styles.layout = "horizontal"
-            self.styles.width = "30%"
-            self.styles.min_width = 30
-            self.styles.max_height = None
 
     @classmethod
     def for_screen(cls, screen_id: str) -> "DocsPanel":